GHM

Nem Ölçer Anhidrit Alçı Kağıt GHM3831 GEF38

Stok Kodu
GHM3831-GEF38-GMK38
19.957,87 TL
* 1.855,92 TL den başlayan taksitlerle!!
*Stokda olan Ürünler 12:00'ye kadar sipariş verilirse aynı gün kargoya verilir.
Nem Ölçer Anhidrit Alçı Kağıt  GHM3831  GEF38

Resistive material moisture and temperature measuring device

Conform to EN 14080 : 2013 EN 16351 : 2015 Suitable e.g. for glued timber construction and laminated timber (MPA certified and listed)

HIGHLIGHTS:

  • serial interface or analog output 0 ... 1 V, freely scalable
  • incl. calibration protocol

GENERAL:

The GMH 3831 offers decisive advantages in handling, user-friendliness, functional range and accuracy. The absolute moisture of 494 material types is displayed directly and can be automatically converted to water content. The cumbersome usage of calculation tables becomes a thing of the past. Additionally you get a moisture rating (wet ... dry) of the measured material.

APPLICATION:

Precision measurements in cut-wood, chip board, veneer, sawdust, wood chips, wood wool, flax, straw, hay, concrete, bricks, wash floor, plaster, limestone mortar, cement mortar, paper, carton, textiles, wood chips, professional firewood humidity measurement, etc.
For architect, expert, inspector, building contractor, painter, carpenter, parquet joiner, floor tiler, wood works, timber desiccation plant, building repair company, textile industry etc.

SPECIFICATIONS:

Measuring principle
Moisture:
Resistive material moisture measurement acc. to DIN EN 13183-2:2002
Temperature
external:
thermocouple, NiCr-Ni (type K)
internal:
NTC
Characteristic curves:
494 material characteristics
Measuring range:
Moisture:
0.0 ... 100 % u (material moisture)
0.0 ... 50 % w (water content, wet basis)
(depends on selected characteristic)
Temperature:
-40.0 ... +200.0 °C (-40.0 ... +392.0 °F)
Moisture rating:
9 steps (dry ... wet)
Resolution:
0.1 % or 0.1 °C (0.1 °F)
Device accuracy: (at nominal temperature)
Wood:
±0.2 % material moisture (deviation from corresponding characteristic curve in range 6 ... 30 %)
Building material:
±0.2 % material moisture (deviation from corresponding characteristic curve)
Temperature:
(external) ± 0.2 % of m.v. ± 0.3 °C
Scope of supply:
Device, battery, calibration protocol, manual



Beraber gelen (GMK38 kablo ile) Düz Yassı Probu GEF38

Flat electrode (pair)   
for screed, paper, etc.
Bu ürüne ilk yorumu siz yapın!
Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.
Nem Ölçer Anhidrit Alçı Kağıt GHM3831 GEF38 Ölçü Aletleri ve Sensörler konusunda uzmanlaşmış olan SINAR 1976 yılından bu yana faaliyetine devam etmektedir. Termometre imalatı bir yana, diğer manometreler, termometre, datalogger, basınç kalibratörü, ph ve iletkenlik ölçer, çözünmüş oksijen ölçer, sensörler, basınç transmiterleri, debimetreler, kütle akış debimetresi gibi ölçü kontrol aygıtlarını ithal ederek yurt içinde dağıtır. GHM3831-GEF38-GMK38
Nem Ölçer Anhidrit Alçı Kağıt  GHM3831  GEF38

Tavsiye Et

*
*
*
IdeaSoft® | Akıllı E-Ticaret paketleri ile hazırlanmıştır.